Pour·Measure·Control·Know

The standard in the Netherlands for forty years: Verboom.

Now the next generation.

Concrete gains strength out of sight. Verboom measures the temperature in the element and shows you, hour by hour, when the striking strength is reached. New Sensorbox, new Verboom Platform — developed in-house, from circuit board to platform.

Need a few Sensorboxes for one project? Rent them

Watch the filmHow it works · 1:13
The Verboom Sensorbox BM-413: red housing with start button, label and three connections for thermocouples.
New · Sensorbox BM-413Developed in Moordrecht
70 years
Keeping concrete at temperature
since 1956
13 countries
Where Verboom
is used to measure
1984
Our first
maturity computer
98 live
Measurements running now
worldwide
How it works

See how it works. Click on a product.

One platform, on site and in the precast plant, and new: formwork pressure during the pour. Beside the road, the temperature in the asphalt layer. Click a red dot in the drawing, or choose a product below the drawing.

Since 1984

Forty years ahead.

From our first maturity computer to the Sensorbox: each generation took a step that Dutch construction then came to take for granted. And we are already testing the next step.

  1. 1984

    Our first maturity computer

    The MC841 determines the maturity and strength of young concrete, on site.

  2. 1996

    Controlling heating on maturity

    The MC 900-S switches the heating off as soon as the maturity is reached in time.

  3. approx. 2011

    Measuring via the internet

    The MCR-21 transmits by itself. You follow the measurement online, with an email or text message when the time comes.

  4. approx. 2025

    Sensorbox and Verboom Platform

    Developed in-house since 2023, from circuit board to platform; with customers since 2025. With the calibration curve from the PDF and a notification on your phone.

  5. Now

    Asphalt

    Temperature inside the asphalt layer with the BM-412 asphalt set. On trial sections of road builders and Rijkswaterstaat since 2024.

    About road construction
  6. Now Under research

    Measuring conductivity

    New low-carbon binders such as geopolymers often barely warm up. Measuring temperature alone is then not enough. That is why we are now testing measurement based on conductivity.

    First tests running
The film · 1:13

How it works, in just over a minute.

From the case on site to the notification that your target has been reached. Watch how a measurement runs, with voice-over.

Out of the case, onto the pour

Make a measuring point, fit the box, one press of the button.

The calibration curve from the PDF

Drag in the graph from your concrete plant; the cubes are read out.

A message when the time comes

By app, text or email. With the LED tower (option), the light on site also switches to green.

Knowledge

What is maturity?

  1. Concrete gains strength through time and temperature. Warm concrete hardens faster than cold concrete.
  2. Maturity adds the two together, in °C·h. The same maturity means the same strength, whatever the weather does.
  3. The platform calculates weighted maturity according to De Vree, using the maturity method (NEN 5970). The C-value of your cement says how sensitive it is to heat.
Verboom Platform

Forty years the Dutch standard for striking formwork. Now as a platform.

The same measurement, the same calculation rule. But the box now sends the data itself, you see it on your phone, and the report is ready when your client asks for it.

The report your client asks for

Per pour, per sensor, per hour, with the calibration curve and the calculation rule. Calculates using the maturity method (NEN 5970).

The calibration curve from the PDF

Drag in the graph from your concrete plant. The cubes and the C-value are read out; you check them.

One press of a button

The measurement runs. You get a message when the target is reached, even at night, without anyone having to go there.

The measurement page in the Verboom Platform: expected ready Sat 24 Oct 12:30, with the temperature, maturity and strength per sensor.
The measurement page: temperature, maturity and strength per sensor, and when your target is expected to be reached.
Winter concreting

Low-CO2 pours, even when it freezes.

  1. Low-carbon cement is slow in the cold. That is why construction falls back on clinker-rich cement in winter.
  2. Targeted additional heating keeps low-carbon concrete on strength in winter too, for a fraction of the CO₂ the cement saves.
  3. Targeted heating is only possible if you measure: maturity in wall and slab, and the heaters off as soon as the striking strength is reached.

The heat comes from our partner Verboom Installatietechniek, an independent company. The Verboom Platform switches their heaters off as soon as the striking strength is reached.

Partner

Heating: Verboom Installatietechniek

If your concrete still has to be strong in time in the cold, our partner Verboom Installatietechniek supplies the heat — an independent company, separate from Verboom Concrete Technology. They have been heating tunnel formwork construction for decades: tunnel formwork heaters in the tunnels, the propane tank and the complete installation, with service on site. We determine the maturity in the concrete and switch the heaters off as soon as the striking strength is reached. That way you heat no longer than necessary and strike the formwork on time every morning. Two companies with the same roots in 1956, and since around 2021 each with its own owner.

Call Verboom Installatietechniek: +31 182 37 98 42 Contact via our partner
Last 90 days

Where Verboom is measuring now.

Each red dot is a region where customers have measured with the Sensorbox in the last 90 days; the bigger the dot, the more boxes. A red ring: somewhere in that country. The grey rings are the countries where MCR-21s measure.

live 98 measurements running now

A region only appears when at least three customers measure there. We show no numbers, and never where a single customer measures.

They measure with Verboom
  • Dura Vermeer
  • Gebroeders de Koning
  • Roco
70

years of keeping concrete at temperature.

In 1956, customers asked gas merchant Gerard Verboom whether he could heat concrete. He developed his first concrete heaters; a nephew developed the measuring equipment to determine the strength of young concrete using weighted maturity.

Under Krijn Verboom, and from 2012 under Xander Schuite, Verboom grew into the obvious name for maturity measurement in Dutch construction. In 2023, Alwin van der Heide took a stake in Verboom and, together with Xander Schuite, began the move to fully in-house development and production: circuit boards, firmware and platform. In November 2026, Alwin van der Heide takes a majority stake; Xander Schuite remains connected as adviser. Seventy years after Gerard's first heater, the challenge is the same again: getting concrete strong in time, even when it freezes. Only now low-carbon, measured and controlled on maturity.

  1. 1956Gerard Verboom heats concrete
  2. 1988Krijn Verboom expands; Xander Schuite joins
  3. 2010Heating and measuring from one source
  4. 2025Sensorbox and Verboom Platform
  5. 202670 years of Verboom; majority stake Alwin van der Heide, Xander Schuite adviser
About us →
Contact

Know when your concrete is ready.

Want to see how it works on your own project? Call or email us and we will look at your next pour together.